Lecture 9: MIT Glass Lab Tour
MIT OpenCourseWare
Glass families and stress 0:00
Peter Houk and Mariel Bass introduce the MIT Glass Lab and use two demos to show how glass behaves when its composition changes. He compares borosilicate, or Pyrex, with other glasses and explains that different thermal expansion rates can make them incompatible. He then turns to engineered stress in glass, including tempering and the more extreme Prince Rupert drop, where rapid cooling makes the outside compress while the inside stays hot.
Colors, cane, and blowing 1:30
The lab furnace is a continuous-feed system that keeps molten glass ready every day. He explains that the lab works with cullet, not raw sand and soda ash, because they avoid airborne silica. After the stress demo, he shows colored cane made from fritted glass and oxides, then heats, twists, and pulls it into thin canes. He uses red, gray, and gold cane, measures diameter with calipers, and begins assembling a blown object on a hollow blowpipe.
Shaping and Annealing 35:06
He uses the torch to even out heat near the pipe end, then switches to a foot pedal and compressed air so glass can be blown without mouth contact. Mariel helps form the stem while he times the work, showing how cane flattens on a wider surface. He finishes by explaining annealing: cooling slowly overnight to avoid stress and thermal shock.
AI-generated summary. It can be wrong or incomplete - check anything that matters against the original.

