Lecture 2 on Topic 2: Classes of Amorphous Materials
MIT OpenCourseWare
History and structure 0:00
Amorphous materials depend strongly on processing history, especially thermal history. The same melt can yield very different properties if you cool it at different rates, so you need the composition and the processing details to reproduce a result. Liquids have no fixed lattice, crystals have short-range and long-range order, and glass sits between them with only short-range order. You can move from liquid to glass by melt-quenching, from glass to liquid by softening, and from glass to crystal by heating to the crystallization temperature Tx. Crystal can also become amorphous by radiation damage or by heavy mechanical deformation and milling. Structural descriptions are statistical, and the pair distribution function g(r) measures how number density changes around a chosen atom.
Glass families and city layout 16:31
Crystalline and amorphous order is compared with cities. Grand Central Station is treated as a crystalline city, with even an edge dislocation you could trace on a map. Boston streets are the opposite. They are called amorphous, and the point is that the same idea of ordered versus disordered structure can appear outside solids as well.
Network glasses basics 17:33
The main glass classes here are inorganic network glasses. These include oxide, chalcogenide, and halide glasses, while metallic glasses are handled differently later. Network formers build the backbone of the glass. In silica, silicon links with oxygen in tetrahedra that join into a three-dimensional network. Network modifiers, such as sodium, enter that network and break links between tetrahedra.
Silica volume anomaly 33:00
Silica glass behaves oddly because its thermal expansion coefficient can turn negative over a range of temperatures. As you cool it, the volume can rise instead of fall, so the glass line can bend back above the usual supercooled liquid curve. Faster cooling makes the material leave the liquid line sooner. Slower cooling lets it follow that line longer before it becomes glass. The result is that slow-cooled silica can have a larger volume than fast-cooled silica, which is the opposite of most glasses. The point is that slow cooling always lowers enthalpy, but it does not always lower volume.
Boron glasses and uses 58:30
Boron oxide, B2O3, forms glass with BO3 units that warp out of plane into a three-dimensional network. When sodium is added, it can either create non-bridging oxygen, which lowers connectivity, or drive B3 to B4 conversion, where boron becomes fourfold coordinated and connectivity rises. These opposite changes explain why density, refractive index, glass transition temperature, and thermal expansion can all peak or dip at different compositions. The main point is that composition controls structure, and structure controls properties. Borosilicate glass uses both boron and silicon to get low thermal expansion, easier processing, and better chemical resistance. Pyrex is the common example, and it is used for lab beakers, telescope mirrors, and other places where thermal shock resistance matters.
Aluminum Silicate 1:09:03
Aluminum silicate matters for later uses that need good mechanical properties. In glass, aluminum can act in two ways. It may behave like a modifier and create non-bridging oxygen, or it may become four-fold coordinated and help build the network. The balance depends on stoichiometry, which also shows up in conductivity.
Non Oxide Glasses 1:10:30
Some glasses replace oxygen with sulfur, selenium, or tellurium. These chalcogenide glasses are heavier, softer, and easier to mold at lower temperature. They are valued for infrared transparency, because their lower vibrational frequency lets thermal infrared pass through. They also have stronger optical nonlinearity.
AI-generated summary. It can be wrong or incomplete - check anything that matters against the original.

